Specification
| Physical Condition | ||
| Construction: | Polycarbonate radome enclosure and die-cast-shell at the bottom | |
| Dimension: | 58 mm(L)x 48 mm(W)x 15 mm(H) | |
| Weight: | 63 grams (excluding cable & connector) | |
| Standard Mounting: | 2 magnetic mounts, screw mount with 2 M3 tapped holes on the base. | |
| Optional Mounting Plate: | Metal flanges with holes for permanent mount. | |
| Cable & Connector | ||
| RF Cable: | 5 meters RG174/U (standard) cable & length (optional) | |
| Pulling Strength: | 6 Kg @ 5 sec. | |
| Connector Available: | BNC, TNC, FME, MMCX, MCX, SMA, SMB or SMC. Straight or right angle. | |
| Optional Adapters: | Universal Connector Adapter (FME to TNC/BNC/SMA/SMB/MCX) | |
| Antenna Element | ||
| Polarization: | R.H.C.P. (Right Hand Circular Polarization) | |
| Absolute Gain at Zenith: | +3 dBic typically | |
| Gain at 10o Elevation: | -1 dBi typically | |
| Axial Ratio: | 3 dB max. | |
| Low Noise Amplifier | ||
| Gain: | 27 dB typically | |
| Band Width: | 2 MHz min. | |
| Noise Figure: | 1.5 Typical. | |
| Supply Voltage: | 2.5~5V DC | |
| Current Consumption: |
10.6mA + 1mA @ 3V DC 21mA + 1mA @ 5.0V DC |
|
| OVERALL PERFORMANCE (Antenna Element, LNA & Cable) | ||
| Center Frequency: | 1575.42 MHz. | |
| Gain: | 28 +2dB (Cable loss) note:1. | |
| Axial Ratio: | 3 dB max. | |
| VSWR: | 2.0 max. | |
| Output Impedance: | 50 ohm | |
| Environmental conditions | ||
| Operating Temperature: | -40°C~+85°C | |
| Storage Temperature: | -50°C~+90°C | |
| Relative Humidity: | 95% non-condensing | |
Features
Applications

Tag: Low-Voltage GPS Antenna | Fixed GPS Antenna | GPS Antenna Low Input Voltage | Fixed GPS Antenna Low Input Voltage